Of course, this device will not be the most popular for the Russian market, but you never know who will want to try their luck in Africa? What is known about the new metal detector from Minelab? Also with the same name &# 8212; Gold Monster 1000! Just a golden monster number 1000.
Содержание статьи:
• Super high performance 45 kHz
• 2 search coils included
• Waterproof design
• Easy quick start
• Universal adapter for rod
Minelab promises that:
GOLD MONSTER 1000 outperforms all other single frequency very low frequency gold detectors!
Read on:
Until now, there has always been a trade-off between frequency and sensitivity when optimizing metal detector performance, as lower frequencies are more sensitive to large gold nuggets, and higher frequencies are more sensitive to smaller ones gold nuggets …
The three curves in the metal detector comparison chart represent each detector’s ability to find small gold nuggets of a certain size at the maximum depth possible. Most metal detectors will find a very large nugget just below the surface of the soil, however the detector’s sensitivity to gold determines how many smaller nuggets will ultimately be recovered in heavy (noisy) soil at greater depths.
An 18 kHz metal detector will generally have a depth advantage on nuggets ≥ 1.0 g over basic mid-range metal detectors, and a 71 kHz metal detector will generally have a depth advantage on nuggets ≤ 0.1 g. The most advanced GOLD MONSTER The 1000 uses a 45 kHz intermediate frequency and a 24-bit signal processor.
This basic combination significantly improves gold sensitivity over other very low frequency single frequency metal detectors over a wide range of nugget sizes without introducing excess noise or false signals.
The GOLD MONSTER 1000 has improved iron/base metal discrimination, and it performs better in conductive (salty) soils than higher frequency metal detectors, making it an ideal choice when maximizing gold recovery!
Well, apparently the guys are trying to catch the golden mean in the VLF device using the average (for gold devices) frequency. Deus and XP also approached this — the new coil from Deus operates at frequencies up to 55 kHz. Isn’t it easier to use pulsers to search for small gold nuggets?
Settings
Device design
The design of the device especially amused me. The device is modular. But in order to insert one part of the rod into another, what solutions do you know? Yes, you can use clamps to secure one rod inside another, but on the Minelab Gold Monster 1000 something has been implemented in the category «everything new is long-forgotten old& #187; literally — I remember a similar solution in one of my chairs from the distant 90s and the inscription there was: «Made in the USSR».
But look at another original solution — The detector block is removed here and installed on the rod. + for such a bonus to the compactness of the device. Apparently, so that African children can easily escape from guards or bandits by hiding a bag of gold and a device in some compact school backpack.
Overview of use and assembly
In general, everything described above is clear from the video. Clear and accessible!
Characteristics
As for me — Minelab was able to surprise. Although their products are always not the cheapest, this is their cheapest and the first such cheap gold-prospecting device. Of course, the solution with screwing in the rod is funny, but the removable detector block was very surprising and interesting.
What do you think, will Africans go digging with such a device? Write your opinion on the device in the comments, for the photo with a screw-in leg from a Soviet chair +100500 to karma from me immediately! ~
That’s not all, we are slowly collecting information about Minelab Gold Monster 1000 into our knowledge bank, all posts on the topic can be found here.