With Deus, everything is not as simple as it might seem. The device is worthwhile and interesting, because it is not without reason that until now, every new product is compared with Deus, and quite often the comparison is not in favor of the new product. How many copies were broken due to a banal dispute between XP Deus and Equinox 800?
I made the main conclusion for myself – HR Deus must be listened to and listened to carefully. The device on fairly difficult ground (where the bg does not rise above the value of 65) picks up such deep targets that few other devices will detect. Unfortunately, such conditions cannot be repeated at the test site, so we have to test it on site.
So here's my deep program for Deus:
When you turn on the device, turn on the standard Deep or “Deus Deep” program, as in the Russian version. My firmware version is already v.5.21 and I called the program “Finishing”.
Discrimination: -6
Professional settings: 5 tones, be sure to adjust the tones (we shift them to taste, but I divided 4 tones minus from -6 to +75, and set the highest tone to 75 or 85+). For the first 4 tones, we set the voice to a minimum, starting from 130 Hz, and the very last tone, which I have from 75, is raised to the very top so that it sounds completely different from the 4 previous tones. The difference should be clear and obvious. I have 120, 251, 460, 680, 993. You see the difference – 680 and then immediately 993!
Sensitivity – set according to the coil and the nature of the search, usually 90-94.
Professional settings – Coil current to maximum (but ensure stable operation).
Frequency – 17.7 kHz.
Speed – 1.
Professional settings – Noise reduction -1.
The volume of weak signals is 5.
Professional settings – Sound overload 0.
Label – 00-00.
We definitely pump the soil, you can set the tracking and the soil to track from 0 to 75 (soil cutting from 99 to 75). Ground sensitivity 5-6.
That's all the settings!
No fluff on the cops!
PS And yes – the X35 coils are incredibly stable and deep.
